BleepinJeep Yoke Wrench Tool

Fits many style yokes or flanges, axles or transfer cases including AMC, GM, Ford, Dana, New Process, and Yes the Ford 8.8 unlike the competitors tool. It is 3/8″ thick which is much thicker and stronger then the competition as well! Used to hold the yoke in place while applying torque on the nut/pinion nut and for setting bearing pre-load. Perfect for loosening stubborn pinion nuts or for high torque applications such as a crush sleeve that requires 250 ft. lbs. Uses a 1/2″ breaker bar and/or a 3/4″ pipe for leverage. Fits 1310, 1330, 1350, 1410, and many more sized u-joints yokes, and flanges. Includes Directions.

Make sure this fits by entering your model number.
Fits many style yokes or flanges, axles or transfer cases. Used to hold the yoke in place while applying torque on the nut/pinion nut and for setting bearing pre-load. Perfect for loosening stubborn pinion nuts or for high torque applications such as a crush sleeve that requires 250 ft. lbs.
Use a 1/2” breaker bar or a 3/4” black pipe (available at any hardware store) for leverage
Hole is over 2” and fits most sockets. Use a breaker bar to loosen or a torque wrench to tighten retaining nut to spec.
For higher torque applications use a grade 8 bolt with a shoulder so the threads arent taking the load.